Almost everyone already knows about the method of hacking WiFi with the help of handshake interception and decryption. It is implemented by the aircrack utility and involves a fairly large number of commands. Airgeddon automates this process and allows to intercept and decrypt the handshake with a couple of clicks on the keyboard.
Setup and use
Install Kali Linux (https://www.kali.org/downloads/).
Download the repository with the command
◽https://github.com/v1s1t0r1sh3r3/airgeddon.git clone ️git
Go to the directory and run the script.
◽️sudo bash airgeddon.sh
If you have all the necessary components on your PC, Airgeddon will suggest you choose a network card. Usually it starts with wlan. Enter its number and press Enter.
After starting, the main menu will open. In principle, the utility management is limited to entering the command number. Accordingly, for the basic handshake capture, the map shall first be switched to the monitor mode with 2 prescriptions. Next, enter 5 in the Handshake operation section.
Select the “Explore for” item. When you get enough targets, press Ctrl-C. Next, you will need to select an access point only the one with an asterisk next to the number, because it means that other users are connected to the network.
It remains to select “Capture Handshake” and enter the command 2. Two windows shall be opened and after the handshake has been intercepted, it shall appear in one of them. After that you will need to confirm the interception in the main window with Airgeddon.
Then you can go to the main menu and select there under point 6 offline decryption of the handshake. You can also use online resources. In any case, the handshake is intercepted without a single command.